Deck System Logo
Deck System Logo
NEW
 
Summer 2002
(July 19th):
Picked up 8 ea 4"x4"-8' treated posts locally for the perimeter deck's hand rail system.
 
(July 20th):
Cut the 8' pieces in half and then cut out an 162 degree chunk by passing the 4' sections through my radial arm saw twice. Each pass made a 9 degree cut half way into the post along one edge.
 
 
These posts will be drilled and mounted using 3/8"x6" galvanized lag screws with 3/8" galvanized flat washers.
 
 
     
 

1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13
14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

  
|
|
|
|
|
|
|
|
|


© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.