DECKPLANS.com | Step #6 | How to Build an Octagonal Deck

How to Build an Octagonal Deck

How to Build an Octagonal Deck - Step #6

Page 6 of 12

Step 6: Attach Remaining 2"x6" Support Board.

Position and attach the remaining 2"x6" support board to the end boards using the dimensions provided on the plan. Use two 2 1/2" deck screws to attach the support board to the end board.

<< Prev - Next >>

Article Index
How to Build an Octagonal Deck
Step 2: Place the two corner Dek-Block® piers
Step 3: Level the support board.
Step 4: Level the opposite side.
Step 5: Square the Frame.
Step 6: Attach Remaining 2x6 Support Board.
Step 7: Position remaining Dek-Block® Piers.
Step 8: Placing the outside supports.
Step 9: Attach the angled sides.
Step 10: Place remaining support boards.
Step 11: Place remaining Dek-Block® piers.
Step 12: Attach the Decking.
All Pages

Printable Step by Step Octagonal Instructions

The printable version of our instructions are in Adobe PDF format. You must have Adobe Reader to be able to view and print the plans. The Acrobat Reader is free from Adobe.

CustomDeckPlans.com

If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com
CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.

Step 6: Attach Remaining 2"x6" Support Board.

CustomDeckPlans.com

Plan Types for Purchase