You are here
CustomDeckPlans.com
If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.
Plan Types For Purchase
How to Build the Deluxe Pool Deck
Step 14: Secure decking
Starting from one edge of the deck, attach the first 2"x6" surface board flush to the edge of the deck. Along the angled section of the deck, allow the 2"x6" surface boards to extend past the angled end boards by at least one inch. Secure with two 2 1/2" deck screws at the connection of each support board. If the surface boards are pressure treated and wet, b sure to position the next surface board directly next to the first. Within a few days, a small gap will form as the boards dry and shrink. If the surface boards are cedar, redwood, or composite decking, leave at least an 1/8" gap between the surface boards
Article index
- Step 1: Place the "Core" rectangle
- Step 2: Cutting the first 4"x4" posts to length..
- Step 3: Level the support board.
- Step 4: Cutting the opposite edge 4"x4" posts to length.
- Step 5: Square the Frame.
- Step 6: Position support boards and Dek-Block® piers.
- Step 7: Cut remaining 4"x4" posts.
- Step 8: Construct the angled perimeter.
- Step 9: Complete interior framing.
- Step 10: Building out from the core.
- Step 11: Completing the frame.
- Step 12: Attach the blocking boards along the inside edge.
- Step 13: Attach 2"x4" Diagonal Bracing Boards
- Step 14: Secure decking
- Step 15: Attach handrail posts.
- Step 16: Attach handrail boards..
- Step 17: Secure spindles
© 2012 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc.
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
