You are here
CustomDeckPlans.com
If you don’t feel comfortable modifying a plan or you have something that is too complex to even imagine, try www.CustomDeckPlans.com CustomDeckPlans.com is a full service planning and design firm specializing in DekBrands Floating Foundation Deck System.
Plan Types For Purchase
How to Install a Wood Railing with Posts
Step 3: Secure 2"x6" board between the posts
Start by measuring the distance between the 4"x4" posts. For greatest accuracy, be sure to measure from the bottom of the 4"x4" posts. (as 4x4's might be slightly off plumb or warped). Then cut the 2"x6" board to length.
Mark a line 34 1/2" above the deck surface on the 4"x4" post. Position the top edge of the 2"x6" flush with this line, then position the 2"x6" face flush to the inside edge of the 4"x4" post.
Lastly, secure the 2"x6" board to the 4"x4" post by placing one deck screw at an angle from the bottom of the 2"x6" board into the 4"x4" post, and one deck screw at an angle from the top of the 2"x6" board into the 4"x4" post.
Article index
- How to Install a Wood Railing with Posts
- Step 1: Determining the Layout
- Step 2: Install 4"x4" pre-notched handrail post
- How to Notch a Handrail Post
- Step 3: Secure 2"x6" board between the posts
- Step 4: Position horizontal 2"x4" board on top
- Step 5: Pre-drill 2"x2" spindles
- Step 6: Mark and position the 2"x2" spindles
- Step 7: Check for plumb and secure
© 2012 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc.
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
