Deck System Logo
Deck System Logo
NEW

How to Install a Railing with Post


Step 1: Determining the Layout


Take a moment to determine the layout and spacing of your handrail design. Begin by determining the areas where handrails will not be installed, including stairs, steps and other openings.

Next, determine the location of the 4"x4" posts. The maximum spacing between posts should not exceed 6 ft. from the center of one post to the center of the next post.

 

Deckman's Tip


The corners of the deck are the most difficult areas to determine location and position. In this example, each post has an 1 1/2" notch in the bottom of the post. Which side of the corner should the post go on? How should the post be positioned?

The posts should be placed along the longest side of the deck. In this example, the corner posts would go along the 14 ft. edge of the deck, and the edge of the post would be flush/aligned with the 10 ft. edge of the deck. Instructions on how to secure the posts will be described later.

 
 

Printable Step by Step
Handrail Instructions


The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.


next  

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7

  next

|
|
|
|
|
|
|
|
|


© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.