NEW

How to Install a Railing with Post

Step 3: Secure 2"x6" board between the posts

Start by measuring the distance between the 4"x4" posts. For greatest accuracy, be sure to measure from the bottom of the 4"x4" posts. (as 4x4's might be slightly off plumb or warped). Then cut the 2"x6" board to length.

Mark a line 34 1/2" above the deck surface on the 4"x4" post. Position the top edge of the 2"x6" flush with this line, then position the 2"x6" face flush to the inside edge of the 4"x4" post.

Lastly, secure the 2"x6" board to the 4"x4" post by placing one deck screw at an angle from the bottom of the 2"x6" board into the 4"x4" post, and one deck screw at an angle from the top of the 2"x6" board into the 4"x4" post.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7

Printable Step by Step Handrail Instructions

The printable version of our instructions are in Adobe PDF format. You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.