NEW

How to Install a Railing with Post

Step 6: Mark and position the 2"x2" spindles

First, determine the location of the 2"x2" spindles then find the center point of the 2"x6" vertical board. From this point, mark a line every 5-inches along the 2"x6" board.

Next, measure the distance from the mark that is closest to the 4"x4" post (should be equal on both sides).

If the measurement is greater than 2 1/2 inches, use the current marks.

If the measurement is less than 2 1/2 inches, offset ALL of the current marks by 2 1/2 inches. (Make sure to differentiate the two different marks.)

To secure your spindles, hold the 2"x2" spindle centered over the mark you drew in the previous step. Position the top of the 2"x2" spindle tight to the bottom of the 2"x4" horizontal hand rail board. Secure the 2"x2" spindle to the 2"x6" vertical board using only one deck screw.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7

Printable Step by Step Handrail Instructions

The printable version of our instructions are in Adobe PDF format. You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

© 2008 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.