floating foundation deck system  
deckplans.com
free deck plans deck gallery how it works how to build deck build support building a deck support locate dek-block retailer
     

How to Build an Octagonal Deck

Step 10: Place remaining support boards.

Along the angled end boards, find the locations for the remaining support boards. (You will NOT find the dimensions for these boards on the plan. This is intentional. Due to slight differences in construction methods, the lengths of these remaining supports may vary.) Before cutting anything, place the 2"x6" support board on top of the 2"x6" angled end boards at the found location. Using a pencil from below, mark the angle and location of the cut. Next, cut both ends with a 45 degree angled cut.

After cutting the remaining support boards, position into the frame and secure with two 2 1/2" deck screws at each connection.

 

 

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

next  

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12

   next
Home


© 2007 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.