How to Build a Rectangular Deck

Step 7: Fill remaining 4"x4" Posts.

In each row, measure the distance between the 2"x6" support board and the Dek-Block® pier. Cut 4"x4" posts to length and position them between the support board and the Dek-Block® pier. Repeat this step until all 4"x4" posts are cut and positioned. Next, secure all support boards and 4"x4" posts using two 2 1/2" deck screws at an angle from each side (toe-screw).

Deckman's Tip

This is a great job for 2 people. Have one person measure the height for the 4"x4" post and another person cut the post. Go down the rows measuring and cutting all of the posts, then place all the posts at the same time. This may require lifting the frame up slightly in order to get the post under the support board.

If you are building by yourself, go down the rows measuring the height for the 4"x4" posts. Write the measurement on a piece of paper and on the side of the support board. Next cut all the 4"x4" posts and position them accordingly.

Toe-Screwing Supports

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7 - 8