How to Build a Splash Pool Deck

Step 1: Building Support Frames and Attaching Metal Brackets

Using 2"x6" treated lumber, begin by cutting Support Frame pieces (A, B, C, D, and E) to length, as shown in Diagram 1. Cut enough pieces to assemble all but one Support Frame. Most plans require 18 or 24 support frames, depending on the size of the pool and deck.

For example: If the entire deck requires 18 Support Frames, pre-cut lumber for 17 Support Frames. The last frame will be cut-to-fit due to irregularities of pool sizes and construction methods. For some pools, the filters will affect the framing of the deck. So this is the best location for the last custom frame to be cut and positioned.

Cut an angle on each end of pieces A, B, and C, as shown in Diagram 2. Look to the plans for the degree of angle to cut. Most plans will be either 10 degrees or 7 1/2 degrees. Pieces D and E will be cut with a square 90 degree angle on each end.

Attach the four outside pieces of the Support Frame, as shown in Diagram 3. Center and secure one - 2 1/2" deck screw at each connection.

Before Building

Download a free detailed plan with full material list and measurements from our Deck Plans Section.

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7