floating foundation deck system  
deckplans.com
free deck plans deck gallery how it works how to build deck build support building a deck support locate dek-block retailer
     

How to Build a Splash Pool Deck

Step 4: Attaching Diagonal Bracing

Place a 2"x4" board diagonally behind the 4"x4" posts. With a pencil, mark the angle at each end and cut. Attach the 2"x4" diagonal board by toe-screwing two - 2 1/2" deck screws from each side. Repeat the process, alternating angles from section to section. Bracing should be placed between the 4"x4" posts along the outside perimeter of the deck, and the 4"x4" posts perpendicular to the pool. The 2"x4" bracing boards along the outside perimeter of the deck will need a compound miter cut (a cut angled in two directions - vertically and horizontally).

 
 

Printable Step by Step Instructions

The printable version of our instructions are in Adobe PDF format.

You must have Adobe Acrobat to be able to view and print the plans. The Acrobat Reader is free from Adobe.
next  

Page:
1 - 2 - 3 - 4 - 5 - 6 - 7

   next
Home


© 2007 DekBrands. The content and plans provided on this site are for consumer use only. They may not be reproduced, copied or disseminated, except for consumer construction, without the written permission of DEKBRANDS. DEKBRANDS and Dek-Block are trademarks of Proshop Plans Co., Inc. Patent No. 5,392,575, 5,953,874, 6,324,801B1, 6,446,403B2, 6,550,201B2, and 6,609,346 Pat. Pend/App. Pend. Manufactured under license.