Step 32 - Planter Frame

Cut all 2"x2" cedar boards to length according to dimensions supplied in the plan. Attach following the layout provided in the plan using one 2 1/2" galvanized deck screw at each connection. (Image 34)

Step 33 - Planter Base

Cut three 15 3/4" cedar 2"x4" boards. Attach to base using two 2 1/2" galvanized deck screws at each end. (Image 35)

Step 34 - Planter Sides

Cut twelve 24" cedar 5/4"x6" boards. Starting flush with the edge of the frame, attach using 2 1/2" galvanized deck screws at each end. (Image 36) Evenly space the remaining two 5/4"x6" cedar boards along that side such that the last board extends past the frame the thickness of a 5/4"x6" cedar board. Repeat this for each side.

Step 35 - Side Trim

Place and attach 2"x4" cedar boards at the bottom and top of the planter using 2 1/2" trim head screws. These pieces will need to be cut-to-fit.

Step 36 - Top Trim

Place and attach 5/4"x6" cedar boards on the top of the planter using 2 1/2" trim head screws. These pieces will need to be cut-to-fit. (Image 37)

Printable Step by Step Instructions & Plans